Garden String Lighting : An Ornamental Savior

Patio string lights come in a variety of styles and colors, and they are not just for patios any longer. These lights can also brighten up a deck, add a party atmosphere to a RV, or possibly even illuminate a front door for Christmas. There are plenty of strategies involved with picking out the best lights for your illumination needs; fortunately, none of these steps are physically exhausting.

Patio string lights come in several lengths, which are differentiated by bulb count. The rule of thumb is approximately one light per foot, so a 12 string light is approximately 12 feet long. Several of the bigger lights can be as far as 2 feet apart, however usually the one foot rule applies. When shopping for a set of patio lights, make sure you add adequate length to cover the whole area you wish to illuminate. Do this by physically measuring the length of the area.

Second, there are a range of styles and motifs to choose from. Holiday illumination, special event illumination, or simply plain old summertime cookout lighting can be found. With so many lights to choose from, it is easy to choose several different themes for your lighting needs. Do not forget when you are shopping for these lights to purchase additional light bulbs as well, as string lights produce better results when all of the bulbs are functioning; otherwise, if a single light does not work, none of the string will work either.

Once you have chose the length and the pattern, then it is time to set up the string lighting. Most of the time, you would prefer not to make this a permanent installation, so try to find strategies that do not harm the structure you are lighting. A staple gun works well fine-easily detached, small holes, and uncomplicated. Nailing the lights to the edifice is more of a permanent setting, and ought to be avoided if you do not wish to leave the lights up throughout every season.

Any time you’re mounting the lights with a staple gun, make sure you do not staple through the power supply or any wires. This will likely make the wires short out, and burn out your string before getting a chance to turn them on. This may also lead to a fire, which is threatening. Follow manufacturer’s guidelines when hanging lights to reduce risk.

An additional good rule of thumb on these lights is to always bear in mind they usually are not set up for permanent use. Look for ones that have “cool bulb” technology in order to decrease fire risk. Since most of the decorative globes are produced from plastic, long term lights need to have this technology, or jeopardize melting the plastic globe or overheating the wires. Check the warnings on the packaging rigorously.

Last but not least, patio LED Christmas lights offer you numerous years of illumination granted that you maintain them. Bring them in during stormy weather, since most of them might not be water resistant. Do not leave them on overnight, if at all you take them down, try not to stress the wires. This certainly will make the lights last almost for your whole life.

Want to find out more about LED Xmas lights, then visit Linda Marcel’s site on how to choose the best LED Xmas lights for your needs.

Leave a Reply

Your email address will not be published. Required fields are marked *